Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 43
Routine maintenance
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. Routine maintenance This chapter describes the routine activities you perform to maintain the reliability and productivity of your printer. Adding paper You can add the same kind of paper to a tray when the supply is low without stopping the printer. You must have the same paper or stock loaded in two trays for the system to continue printing while you are loading the other tray. Adding paper to tray 1 or 2 The following steps must be performed to add paper to tray 1 or 2. 1. Press the Tray unlock button on the front of the tray. Wait for the red "Please wait" light to go off. 2. When the green "Ready to open" light comes on, pull the tray out until it stops. Steps 3 through 5 of loading paper into tray 1 or 2, are illustrated in figure 5-1. 3. Press the green release tab. 4. Lift the metal handle on the feed belt and remove any paper under the belt. 5. Move the rear guide to the back of the tray. DocuTech 61xx Operator Guide 5-1