Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 109
Cleaning the Q1222 and Q1210 sensors, Locating the Q1222 and Q1210 sensors
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Problem solving Cleaning the Q1222 and Q1210 sensors Cleaning the Q1222 and the Q1210 sensors should be performed only when directed by a Customer Support Center Representative. Perform the following when it is necessary to clean the Q1222 and the Q1210 sensors. 1. Open the finisher top cover. 2. Look down at the rear section of the tilt bed area, as shown in figure 6-13, to view the sensors. Figure 6-13. Locating the Q1222 and Q1210 sensors 3. Locate the Q1222 and Q1210 sensors, as shown in figure 614. DocuTech 61xx Operator Guide 6-21
Problem solving
DocuTech 61xx Operator Guide
6-21
Cleaning the Q1222 and Q1210 sensors
Cleaning the Q1222 and the Q1210 sensors should be
performed only when directed by a Customer Support Center
Representative.
Perform the following when it is necessary to clean the Q1222
and the Q1210 sensors.
1.
Open the finisher top cover.
2.
Look down at the rear section of the tilt bed area, as shown in
figure 6-13, to view the sensors.
Figure 6-13. Locating the Q1222 and Q1210 sensors
3.
Locate the Q1222 and Q1210 sensors, as shown in figure 6-
14.