Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 68
carefully rewind the remaining wire out of the tubing
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Routine maintenance • If there is no wire on the spool, use the wire cutters to pull the remaining wire carefully out of the tubing, as shown in figure 5-23. NOTE: The wire cutter tool needed to perform this procedure is located next to stitcher spool B. Figure 5-23. Removing the wire from the tubing • If there is wire on the spool, hold it on the spool and carefully rewind the remaining wire out of the tubing and onto the stitcher spool, as shown in figure 5-24. 5-26 DocuTech 61xx Operator Guide
Routine maintenance
5-26
DocuTech 61xx Operator Guide
•
If there is no wire on the spool, use the wire cutters to pull
the remaining wire carefully out of the tubing, as shown in
figure 5-23.
NOTE:
The wire cutter tool needed to perform this
procedure is located next to stitcher spool B.
Figure 5-23. Removing the wire from the tubing
•
If there is wire on the spool, hold it on the spool and
carefully rewind the remaining wire out of the tubing and
onto the stitcher spool, as shown in figure 5-24.