Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 88
Adjusting the decurler lever, Locating the decurler lever
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Routine maintenance Adjusting the decurler lever Perform the following steps to adjust the decurler lever. CAUTION Do not use any paper that is not suitable for system use. 1. Open the right door of the processor. 2. Locate the decurler lever in area 7 of the paper path, as shown in figure 5-46. Figure 5-46. Locating the decurler lever 3. If the print curl is +2 or more, move the green decurler lever to the right. 4. If the print curl is -3 or more, move the green decurler lever to the left. 5. If the decurler adjustment does not eliminate the paper curl problem, or for other curl problems, turn the stack of paper over in the paper tray. 6. If there is still a curl problem, perform steps 1 to 4 again. NOTE: A final solution to the curl problem may be to load a new ream of paper. 7. Close the processor door. 5-46 DocuTech 61xx Operator Guide