Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 56

Routine maintenance CAUTION To prevent dry ink spills, remove the cartridge only when directed to do so by a message on the screen. The following steps must be performed to replace the dry ink cartridge. CAUTION Do not use warm or hot water, or general cleaning solvents to remove dry ink from your skin or clothing. The heat or solvent will set the dry ink and make it difficult to remove. CAUTION If any dry ink should get on your clothes, brushing with a dry paper towel or a stiff-bristled brush may remove the ink. If not, launder your clothes with detergent and cold water. Tell a commercial dry cleaner that the spot is dry ink or "toner" so that they will not use a solvent that will set the dry ink stain. 1. Open the processor doors and locate the dry ink cartridge at the left side of the processor. 2. Place a drop cloth on the floor under the dry ink cartridge area. 3. Remove the empty cartridge, as shown in figure 5-11. a. Pull the empty dry ink cartridge out until it stops. b. Move the green handle to the unlatched position. c. Remove the empty cartridge and discard it. 5-14 DocuTech 61xx Operator Guide