Yamaha N12 Owners Manual - Page 27

Owner's Manual, INPUT CHANNEL

Get Yamaha N12 - n12 Digital Mixing Studio PDF manuals and user guides
UPC - 086792859866
View all Yamaha N12 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

3. Turn on the [ST] switch of the input channels to which your instruments or microphones are connected. Use a channel [ST] switch or [REC] switch to select the bus to which the input channel signals are sent. If you turn on a channel [ST] switch, that input channel signal will be sent to the stereo bus. on NOTE Refer to page 39 for more information how things work when the [REC] switches are turned on. 4. Adjust the volume level of the input channels to which your instruments or microphones are connected by moving the corresponding faders. On the n12 if you set the Meter section's [INPUT METER] switch to POST, you will be able to use the input meter of each channel to check the post-fader signal level. If the C-R SOURCE SELECT [ST] switch in the Control Room section is turned on, you can monitor the STEREO bus signal in the Control Room. If necessary, re-adjust the monitoring level by rotating the [CONTROL ROOM LEVEL] control or the [C-R PHONES] control. POST STEREO BUS L STEREO BUS R INPUT CHANNEL INPUT METER INPUT METER INPUT A INPUT B PRE POST PAN CHANNEL FADER A Hands-On Guide to the n8/n12 Owner's Manual 27 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
A Hands-On Guide to the n8/n12
Owner’s Manual
27
English
3.
Turn on the [ST] switch of the input channels to
which your instruments or microphones are
connected.
Use a channel [ST] switch or [REC] switch to select
the bus to which the input channel signals are sent.
If you turn on a channel [ST] switch, that input
channel signal will be sent to the stereo bus.
4.
Adjust the volume level of the input channels to
which your instruments or microphones are
connected by moving the corresponding faders.
On the n12 if you set the Meter section’s [INPUT
METER] switch to POST, you will be able to use the
input meter of each channel to check the post-fader
signal level. If the C-R SOURCE SELECT [ST] switch
in the Control Room section is turned on, you can
monitor the STEREO bus signal in the Control Room.
If necessary, re-adjust the monitoring level by
rotating the [CONTROL ROOM LEVEL] control or the
[C-R PHONES] control.
Refer to page 39 for more information how things
work when the [REC] switches are turned on.
on
NOTE
INPUT
METER
STEREO BUS L
STEREO BUS R
INPUT
METER
PRE
POST
INPUT A
INPUT CHANNEL
PAN
CHANNEL
FADER
INPUT B
POST