Yamaha RX-Z11 Owner's Manual - Page 101
Speaker Distance Speaker distance, Phase Subwoofer phase, Bass Out Bass out, LFE signals output
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Phase (Subwoofer phase) Use this feature to switch the phase of your subwoofers if bass sounds are lacking or unclear. Choice Normal L Reverse R Reverse L&R Reverse Functions Does not change the phase of your subwoofers. Sets the phase of the left (or front) subwoofer to reverse. Sets the phase of the right (or rear) subwoofer to reverse. Sets the phase of the both subwoofers to reverse. Bass Out (Bass out) Use this feature to select the speakers that output the LFE (lowfrequency effect) and the low-frequency signals. THX Ltd. recommends that "Bass Out" to "SWFR". LFE signals output Choice Front & SWFR SWFR Front Subwoofers and speakers Subwoofers Front speakers Other speakers Output No output No output Output No output No output Output No output No output Low-frequency signals output Choice Front & SWFR SWFR Front Subwoofers and speakers Subwoofers Front speakers Other speakers *1 *2 *3 *4 *3 *3 No output *1 *3 *1 Output(s) the low-frequency signals of the front channels and other speakers set to "Small". *2 Always output the low-frequency signals of the front channels. *3 Output the low-frequency signals if the speakers are set to "Large". *4 Outputs the low-frequency signals of the speakers set to "Small" or "None". Graphical user interface (GUI) menu ■ Speaker Distance (Speaker distance) Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time. Speaker distances Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Initial setting: 3.00 m (10.0 ft) Control step: 0.05 m (0.2 ft) Speaker Distance Adjusted speaker Front L Front left speaker Front R Front right speaker Center Center speaker Surround L Surround left speaker Surround R Surround right speaker Surround Back L Surround back left speaker Surround Back R Surround back right speaker Front Presence L Front presence left speaker Front Presence R Front presence right speaker Rear Presence L Rear presence left speaker Rear Presence R Rear presence right speaker Subwoofer L Subwoofer left Subwoofer R Subwoofer right y If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum. Notes • The available speaker channels differ depending on the setting of the speakers. • If you are only using one surround back speaker, connect it to the SUR.BACK SINGLE jack, and adjust the distance in "Surround Back L". Unit (Unit) Selects the unit for displaying the values of "Speaker Distance" parameter. Initial setting: Feet (U.S.A. and Canada models) Meter (Other models) Choice Functions Meter (m) Adjusts speaker distances in meters. Feet (ft) Adjusts speaker distances in feet. Advanced Operation 101 En