Yamaha RX-Z11 Owner's Manual - Page 105

4 Press 9n to select "EDIT" and press 9ENTER to access the edit window. For more information on the parametric equalizer and each parameter, see page 160. PEQ Data Copy PEQ Select Front L Front R Center Band Gain Freq. Q #1 0.0dB 62.5Hz 1.000 The parameter selected in "PARAM" is highlighted. • Press 9l / h to adjust the parameter. • Press 9k / n to adjust the "Gain". • Press 9ENTER to exit the edit window. y • When you select "Band" in step 3, you can use this menu as a graphic equalizer. • "Band #4", "Band #5", "Band #6", and "Band #7" can adjust the frequencies above of 500 Hz. • When you select "Subwoofer L" or "Subwoofer R" in step 1 and "Band" in step 3, you can adjust "Band #1", "Band #2", and "Band #3" only. In this case, "Band #1", "Band #2", and "Band #3" can adjust the frequencies below of 250 Hz. 5 Repeat steps 3 and 4 until you are satisfied with the results. y If you want to reset all "Parametric EQ" parameter settings for the selected speaker, select "RESET" and press 9ENTER. 6 Select "EXIT" and press 9ENTER to exit from the settings window. ■ Tone Control (Tone control) Use this feature to adjust the balance of bass and treble output to your speakers or headphones. Note Tone Control is not effective when: - the Pure Direct mode (see page 65) is selected. - one of the THX Surround mode is selected (see page 87). - MULTI CH is selected as the input source. Control (Tone control) Choice Functions Speaker Adjust the bass/treble balance of your speakers. Headphone Adjust the bass/treble balance of your headphones. y "Speaker" and "Headphone" adjustments are stored independently. The adjustments for "Speaker" affects the front left/right, center, presence left/ right speaker channels and Subwoofer channel. Graphical user interface (GUI) menu Bass (Bass control) Use this feature to adjust low-frequencies output to your speakers or headphones. Choices: 125 Hz, 350 Hz, 500 Hz Control range: - 6.0 dB to +6.0 dB Initial setting: 0.0 dB Control Bass Treble Auto Bypass Speaker Freq.: 350Hz Gain: 0.0dB +6 0 -6 Treble (Treble control) Use this feature to adjust high-frequencies output to your speakers or headphones. Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz Control range: - 6.0 dB to +6.0 dB Initial setting: 0.0 dB Control Bass Treble Auto Bypass Speaker Freq.: 3.5kHz Gain: 0.0dB +6 0 -6 Auto Bypass (Auto bypass) Use this feature to select whether the audio output bypasses the tone control circuitry when "Treble" and "Bass" are set to 0 dB (see page 65). Choice Auto Off Functions Automatically bypasses the tone control circuitry to provide the purest signal possible when "Treble" and "Bass" are set to 0 dB. Does not bypass the tone control circuitry. ■ Lipsync (Audio and video synchronization) Use this feature to adjust the audio and video synchronization. HDMI Auto (HDMI automatic lip sync mode) If the connected video monitor is connected to the HDMI OUT jack of this unit and compatible with the automatic audio and video synchronization function (automatic lip sync), this unit adjusts the audio and video synchronization automatically. Use this feature to activate or deactivate the automatic lip sync. Choice Off On Descriptions Select this setting if the connected video monitor is compatible with the automatic lip sync. Use "Auto" to make fine adjustments of the audio and video synchronization. Select this setting if the video monitor is not compatible with the automatic lip sync or you do not want to use the automatic lip sync. Use "Manual" to adjustment the audio and video synchronization. Advanced Operation 105 En