Yamaha RX-Z11 Owner's Manual - Page 118
Loading the stored system settings, Loading by the, buttons, Loading by the GUI menu operation
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Saving and recalling the system settings (System Memory) Loading the stored system settings • Before performing the following operations, set the operation mode selector on the remote control to FAMP. • This unit overwrites the stored settings to the current settings of this unit. If you do not want to erase the current settings, save the current settings to any System Memory number in advance. ■ Loading by the 7SYSTEM MEMORY buttons You can recall the system settings stored in "Memory1" to "Memory4" by pressing the corresponding 7SYSTEM MEMORY buttons. y To recall the system settings for Zone 2, Zone 3, or Zone 4, press HZONE on the remote control repeatedly to select the operation zone setting of the remote control in advance. You can recall the system settings for the selected zone only when the zone is turned on. 1 Press one of the 7SYSTEM MEMORY buttons on the remote control to select the desired memory number. "MEMORY 1 LOAD" (example) appears in the front panel display. y "EMPTY" appears in the menu screen if no system settings are stored in the selected memory number. 2 Press the selected 7SYSTEM MEMORY button once more to confirm the selection. This unit loads the settings stored in the selected memory number. ■ Loading by the GUI menu operation 1 Press IMENU on the remote control. The top menu appears in the video monitor. 2 Press 9k / n repeatedly to select "System Memory" and then press 9h. The "System Memory" menu appears in the video monitor. 3 Press 9k / n repeatedly to select the desired zone and then press 9h. In the following example, you select "Main" (main zone). The list of the memory number appears in the video monitor. 4 Press 9k / n to select "Main Load" and then press 9 h. The following menu appears in the video monitor. Memory1 Memory2 Memory3 Main Save Input/HDMI Out Audio Volume SP Config Video Option y If system settings are already stored in the selected memory number, the stored system parameter settings appear in the menu screen. "Memory Empty" appears in the menu screen if no system settings are stored in the selected memory number. 5 Press 9k / n repeatedly to select the desired memory number where the system settings are stored and then press 9h. Once "Load: ENTER" appears in the video monitor, press 9ENTER to confirm the loading. y You can cancel the loading by pressing 9l. Memory1 Memory2 Memory3 Main Save Input/HDMI Out Audio Volume SP Config Video Option Save Load: ENTER 6 Press IMENU to exit from the GUI menu. Main Load Main Save Main Rename Memory1 Memory2 Memory3 Note You can recall the system settings for the selected zone only when the zone is turned on. 118 En