Yamaha RX-Z11 Owner's Manual - Page 108
HDMI Aspect HDMI aspect ratio, Short Message Short message display, On Screen On-screen display time
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Graphical user interface (GUI) menu ■ HDMI Aspect (HDMI aspect ratio) Use this feature to select whether this unit converts the aspect ratio of 4:3 video signals and outputs at the HDMI OUT jacks. Choice Through 16:9 Normal Smart Zoom Functions Does not make any adjustments to the aspect ratio for the HDMI video signal sources. Displays video images with the aspect ratio of 4:3 on your video monitor with the aspect ratio of 16:9. Black stripes appear on the right and left sides as a result. Fits video images with the aspect ratio of 4:3 to your video monitor with the aspect ratio of 16:9. The signals are input with 720p, 1080i or 1080p of resolution, this setting does not affect the video signals output at the HDMI OUT jack. Notes • When "HDMI Resolution" is set to "Through", you cannot make any adjustments to "HDMI Aspect". • If the aspect ratio of the input video source is other than 4:3, this unit automatically ignores the setting of "HDMI Aspect". • When "HDMI Aspect" is set to "Smart Zoom", the video images of the edge of the video monitor are rather stretched. ■ Short Message (Short message display) Use this feature to activate or deactivate the short message display displayed in the main zone video monitor function. Choice Functions On Activates the short message display function. Off Deactivates the short message display function. Note The short message display does not appear in the following cases: - when the component video signals with 720p, 1080i or 1080p resolutions are input - when HDMI video signals are input ■ On Screen (On-screen display time) Use this feature to set the time for which the AM/FM tuning information, HD Radio information, XM Satellite Radio information, iPod menu, or NET/USB menu is displayed in the video monitor after you perform a certain operation. Choice Functions Always Displays the menu unceasingly during an operation. 10sec 30sec Turns off the menu 10 seconds after you perform a certain operation. Turns off the menu 30 seconds after you perform a certain operation. y This setting is applied to the GUI menu in the main zone and OSD in Zone 2, Zone 3, or Zone 4. ■ Position (GUI screen position) Use this feature to adjust the vertical and horizontal position of the GUI screen. Control range: -5 (downward/left) to +5 (upward/right) Short Message On Screen Position Wall Paper / :0 / :0 + Button 9k 9n 9h 9l Moving direction of the GUI display Up Down Right Left ■ Wall Paper (Wall paper) Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input. Choice None Piano Horn Electric Guitar Gray Functions Does not display any background in your video monitor. Displays a background image (the photograph of a piano) in your monitor when there is no video signal being input. Displays a background image (the photograph of a horn) in your monitor when there is no video signal being input. Displays a background image (the photograph of an electric guitar) in your monitor when there is no video signal being input. Display a gray background in your monitor when there is no video signal being input. Note When "Conversion" is set to "Off", no background is displayed even if "Wall Paper" is set to other than "None". 108 En