Yamaha RX-Z11 Owner's Manual - Page 21
Placing speakers, 2/11.1 -channel speaker layout - dsp
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Preparation Connections Placing speakers The speaker layout below shows the speaker setting we recommend. You can use it to enjoy the CINEMA DSP and multi-channel audio sources. ■ 11.2/11.1 -channel speaker layout 11.2/11.1-channel speaker layout is highly recommended for playback the sound of high definition audio formats (Dolby TrueHD, DTS-HD Master Audio, etc.) as well as the conventional audio sources with sound field programs. See page 23 for connection information. FPR FPL FPR C FL FR FPL FR FL C LSW SL RSW RPL 30˚ SR SBL RPR SBR SL SL RPL 60˚ 80˚ SBL SR SR SBR RPR 30 cm (12 in) or more Speaker indications FL/FR: Front left/right C: Center SL/SR: Surround left/right SBL/SBR: Surround back left/right FPL/FPR: Front presence left/right RPL/RPR: Rear presence left/right LSW/RSW: Left/right subwoofer Front left and right speakers The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same. Center speaker The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. Surround left and right speakers The surround speakers are used for effect and surround sounds. Surround back left and right speakers The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions. Front and rear presence left and right speakers See page 27 for details. Left and right subwoofers See page 26 for details. Using di-pole speakers It is recommended that you use di-pole speakers for surround left and right channels for the accurate playback with the THX surround modes. When you use di-pole speakers, place the surround and surround back speakers as below. Set the distance between surround back speakers rather narrow compared with the conventional speaker layout. FL C FR SL SR SBL SBR : Di-pole speaker : Direction of the di-pole speaker phase 21 En