Yamaha RX-Z11 Owner's Manual - Page 52
Once the measurement procedure has been, monitor, move the optimizer microphone to the 3
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Optimizing the speaker setting for your listening room (YPAO) 15 Once the setting has been completed, press 9 ENTER. This unit starts the measurements of the speaker angles. 16 Once the following display appears in the video monitor, move the optimizer microphone to the "(2)" position on the microphone base. Equalizing Level Angle Check Angle Result Put the microphone at 2nd listening position Next:ENTER 1 3 2 17 Press 9ENTER to resume the measurements. 18 Once the following display appears in the video monitor, move the optimizer microphone to the "(3)" position on the microphone base. Equalizing Level Angle Check Angle Result Put the microphone at 3rd listening position Next:ENTER 1 3 2 For other configuration of the listening position The following examples indicate the measurement points when there is a listening position or are two listening positions. Example 1: Two listening positions We recommend that you make measurements in front of and behind the listening positions as well as the listening positions. 3 12 4 Example 2: One listening position We recommend that you make measurements around the listening position as well as the listening position. 5 412 3 19 Press 9ENTER to resume the measurements. 20 Once the measurement procedure has been complete, following display appears in the video monitor. See page 49 for details. Angle Check Angle Result Retry Exit Detail Setup Measurement Over Successfully 52 En