Yamaha RX-Z11 Owner's Manual - Page 142
Advanced setup, Using the advanced setup menu
UPC - 027108929019
View all Yamaha RX-Z11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Advanced setup Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Notes • The settings you make are reflected next time you press BMASTER ON/OFF inward to the ON position to turn on this unit (see page 43). • Only BMASTER ON/OFF and MPROGRAM are effective while you are using the advanced setup menu. • All the other operations cannot be made while you are using the advanced setup menu. • The advanced setup menu is only available in the front panel display. Using the advanced setup menu ■ Speaker impedance SPEAKER IMP. Use this feature to set the speaker impedance of this unit so that it matches that of your speakers. 1 Press BMASTER ON/OFF on the front panel to release it outward to the OFF position to turn off this unit. Choice 8ΩMIN Descriptions Select this setting to set the speaker impedance to 8 Ω. The impedance of each speaker must be 8 Ω or higher. 2 Press and hold MPROGRAM and then press BMASTER ON/OFF inward to the ON position to turn on this unit. Press and hold MPROGRAM until "ADVANCED SETUP" appears in the front panel display. 6ΩMIN Select this setting to set the speaker impedance to 6 Ω. The impedance of each speaker must be 6 Ω or higher. ■ Remote sensor REMOTE SENSOR Use this feature to activate or deactivate the signal-receiving capability of the remote control sensor on the front panel of this unit. ADVANCED SETUP Choice ON Descriptions Select this setting if you want to activate the signalreceiving capability of the remote control sensor. 3 Rotate the MPROGRAM to select the parameter you want to adjust. The name of the selected parameter appears in the front panel display. OFF Select this setting if you want to deactivate the signal- receiving capability of the remote control sensor. Note We recommend setting the parameter to "ON" in most cases. 4 Push MPROGRAM repeatedly to change the selected parameter setting. 5 Press BMASTER ON/OFF to release it outward to the OFF position to save the new setting and turn off this unit. y The settings you made are reflected next time you turn on this unit. 142 En