Yamaha RX-Z11 Owner's Manual - Page 143

See page 142 for the operation of the advanced setup. ■ Wake on RS-232C access RS-232C STANDBY Use this feature to set this unit to transmit data via the RS-232C interface when this unit is in the standby mode. Choice Functions YES NO Select this setting to set this unit to transmit data via the RS-232C interface. Select this setting to set this unit not to transmit data via the RS-232C interface. Initial setting: [U.S.A. Canada models]: YES [Other models]: NO ■ Network standby NET STANDBY Use this feature to select whether this unit accepts the commands via LAN network when this unit is in the standby mode (see page 120). Choice Functions YES NO Accepts the operations via LAN network when this unit is in the standby mode. Does not accept the operations via LAN network when this unit is in the standby mode. Note If you set "NET STANDBY" to "YES", the amount of power consumption in the standby mode is increased. ■ Remote control ID setting REMOTE CON AMP Use this feature to set the remote control ID of this unit for remote control recognition. Choice Descriptions ID1 Select this setting when the ID of the remote control is set to "ID1" ID2 Select this setting when the ID of the remote control is set to "ID2" Setting remote control ID Use this feature to set the remote control ID. This feature is useful when you control multiple Yamaha AV receiver or amplifier with using the remote control. Press GID repeatedly using a ballpoint pen or similar object on the remote control to select the desired remote control ID. Each time you press GID, the remote control ID indicator changes as shown below. Advanced setup ■ Cooling fan operation mode FAN MODE Use this feature to set the operation of the cooling fan of this unit. Choice AUTO CONT. Descriptions Select this setting to set the fan to operate automatically according to the temperature of this unit. Select this setting to set the fan to activate continuously regardless of the temperature of this unit. ■ Bi-amplifier mode BI-AMP Use this feature to activate or deactivate the bi-amplifier function. Choice ON OFF Descriptions Select this setting if you want to activate the bi-amplifier function. Select this setting if you want to deactivate the biamplifier function. Note When "BI-AMP" is set to "ON", the SUR.BACK/BI-AMP terminals cannot be used to connect surround back speakers in that the SUR.BACK/BI-AMP terminals are already used for the bi-amplifier connection (see page 28). ■ Pre-amplifier mode PREAMP MODE Use this feature to select whether you use this unit as the preamplifier in the main zone and use all the internal amplifiers for the other zones. Choice Descriptions ON OFF Select this setting when you use this unit as the preamplifier in the main zone. The audio signals for the main zone are only output at the PRE OUT jacks of this unit. You can assign all speaker terminals for the other zones. Select this setting to use the internal amplifiers of this unit for the main zone, Zone 2, Zone 3, or Zone 4. ■ Recovery and backup of the system settings RECOV./BACKUP Use this feature to save and restore the settings of this unit. Choice Select RECOVERY Restoring the saved setting of this unit. BACKUP CANCEL Saves the current settings of this unit. Cancels the recovery or backup of the settings of this unit. Notes • This unit does not save the FM/AM preset stations, preset network/USB items, and system memory settings. • If no settings are saved, you cannot select "RECOVERY". ID1 ID ID2 y To set the remote control ID of the simplified remote control, see page 132 for details. Advanced Operation 143 En