Yamaha RX-Z11 Owner's Manual - Page 56

Playback Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source. y • We recommend setting the audio input jack select to "AUTO" in most cases. • You can adjust the default the audio input jack select of this unit by using "Audio Select" in "Option" (see page 112). • You can also set the audio input jack select setting in "Audio Select" in "Input Select" (see page 97). 1 Rotate the DINPUT selector (or press one of the input selector buttons (3)) to select the desired input source. 2 Press FAUDIO SELECT (or OAUDIO SEL) repeatedly to select the desired Audio input jack select setting. Available input sources NET V-AUX USB DOCK VCR DVR CBL SAT DTV DVD BD HD DVD MD TAPE CD-R CD PHONO MULTI CH TUNER XM (U.S.A. model) AUTO HDMI COAX/OPT ANALOG A.SEL: AUTO Currently selected Audio input jack select setting Automatically selects input signals in the following order: (1) HDMI (2) Digital signals (3) Analog signals Selects only HDMI signals. When HDMI signals are not input, no sound is output. Automatically selects input signals in the following order: (1) Digital signals input at the COAXIAL jack. (2) Digital signals input at the OPTICAL jack. When no signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output. Note This feature is not available when no digital input jack (OPTICAL, COAXIAL and HDMI) are assigned. Use "I/O Assignment" in "Input Select" to reassign the respective input jack (see page 96). Muting the audio output Press LMUTE on the remote control to mute the audio output. Press LMUTE again to resume the audio output. "VOLUME" flashes in the front panel display when the audio output is muted. y • You can also rotate EVOLUME on the front panel or press JVOLUME +/- on the remote control to resume the audio output. • You can adjust the muting level by using the "Muting Type" parameter in "Volume" (see page 103). Using the sleep timer Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (see page 42). 1 Press one of the input selector buttons (3) on the remote control to select the desired input source. 2 Start playback on the selected source component or select a broadcast station. Refer to the operating instructions for the source component. See page 68 for details about tuning instructions. 3 Press CSLEEP repeatedly to set the amount of time. Each time you press CSLEEP, the front panel display changes as shown below. 120min. 90min. OFF 30min. 60min. The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. SLEEP 120min. SLEEP Flashes STRAIGHT SLEEP Lights up ■ Canceling the sleep timer Press CSLEEP repeatedly until "OFF" appears in the front panel display. SLEEP OFF Disappears The SLEEP indicator turns off, and "OFF" disappears from the front panel display after a few seconds. y • The sleep timer setting can also be canceled by pressing AMAIN ZONE ON/OFF (or DSTANDBY) to set the main zone to the standby mode. • You can also set the sleep timer for Zone 2, Zone 3, or Zone 4. See page 140 for details. 56 En