Yamaha RX-Z11 Owner's Manual - Page 38

Connections ■ Connecting a Yamaha iPod universal dock This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as the YDS-10, sold separately) where you can station your iPod and control playback of your iPod using the supplied remote control. Connect a Yamaha iPod universal dock (such as the YDS-10, sold separately) to the DOCK terminal on the rear panel of this unit using its dedicated cable. ■ Using the TRIGGER OUT jacks This unit can control the components (for example, the electric screen, projector, etc.) corresponding to the selected input source and activating/deactivating the desired zone. This unit sends the 12 V/15 mA direct electric current at the TRIGGER OUT jacks according to the settings of "Trigger Output" in "Manual Setup" (see page 114). Connect one of the TRIGGER OUT jack of this unit and the trigger input jack (or control input jack) of the components with the monaural analog mini cable as follows. DOCK TRIGGER OUT 1 2 * Yamaha iPod universal dock (such as the YDS-10, sold separately) (U.S.A. model) ■ Using REMOTE IN/OUT jacks When the components have the capability of the transmission of the remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input and output jacks with the monaural analog mini cable as follows. Electric screen, projector, etc. * You can connect another component to the TRIGGER OUT 2 jack same as the TRIGGER OUT 1 jack. Note The function when you use this feature with the components may vary depending on the components. Refer to the instruction manuals of the connected components. REMOTE IN 1 OUT IN 2 OUT Remote * control in Remote control out Controlled component (CD or DVD player, etc.) Infrared signal receiver or controlling component * You can connect another set of infrared signal receiver and Yamaha component to the REMOTE IN 2 and OUT 2 jacks same as the REMOTE IN 1 and OUT 1 jacks. 38 En