Yamaha RX-Z11 Owner's Manual - Page 113

■ Decoder Mode (Default decoder mode) Use this feature to designate the default decoder mode (see page 97) for the input sources when you turn on the power of this unit. Choice Auto Last Functions Automatically detects the type of input signals and select the appropriate decoder mode setting. Automatically selects the last decoder mode setting used for the connected input source. ■ EXTD Surround (Default extended surround decoder mode setting) Use this feature to designate the extended surround decoder mode (see page 87) for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choice Auto Last Functions Automatically detects the input digital audio signals and activates the appropriate decoder. Selects the last selected extended surround decoder mode. ■ Memory Guard (Memory guard) Use this feature to prevent accidental changes to sound field program parameter values and other system settings. Choice Off Functions Turns off the "Memory Guard" feature. On Protects the following parameters: - sound field program parameters - GUI menu parameters - speaker levels settings y When you select the protected parameter, " " appears at the bottom left of the GUI screen. You can adjust the parameters when you select the parameter and " " does not appear at the bottom left of the GUI menu even if "Memory Guard" is set to "On". ■ HDMI Set (HDMI settings) Use this feature to adjust the HDMI support audio. Support Audio (Support audio) Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jacks on the rear panel of this unit. Choice RX-Z11 Other Functions Plays back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jacks on the rear panel of this unit. Plays back HDMI audio signals on another HDMI component connected to the HDMI OUT jacks. Graphical user interface (GUI) menu Standby Through (Standby through) Use this feature whether this unit allows the HDMI signals input at the HDMI IN jacks to pass thorough this unit when this unit is in the standby mode. You can also designate an HDMI IN jack and an HDMI OUT jack that accept the signals when "Standby Through" is set to "On" and this unit is in the standby mode. Choice Off On Functions Does not accept the HDMI signals when this unit is in the standby mode. Accepts the HDMI signals when this unit is in the standby mode. Notes • When "Standby Through" is set to "On" and this unit is in the standby mode, the audio signals are only output at the HDMI OUT 1 or HDMI OUT 2. • When "Standby Through" is set to "On", the amount of power consumption in the standby mode is increase. Input/output jack select When "Standby Through" is set to "On", you can designate an HDMI IN jack and an HDMI OUT jack that accept the signals when this unit in in the standby mode. Input (HDMI IN jack select) Use this feature to select an HDMI IN jack select that accepts HDMI signals when this unit is in the standby mode. Choice Selected HDMI IN jack IN1 HDMI IN1 IN2 HDMI IN2 IN3 HDMI IN3 IN4 HDMI IN4 FRONT Front HDMI IN Output (HDMI OUT jack select) Use this feature to select an HDMI OUT jack select that outputs HDMI signals when this unit is in the standby mode. Choice OUT 1 Selected HDMI OUT jack HDMI OUT1 OUT 2 HDMI OUT2 Note Available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component. Advanced Operation 113 En