Acer G540-E5405 Altos G540 User's Guide EN - Page 100
Setting a system password, Supervisor Password or Set User Password, then press
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
90 4 System BIOS Parameter Description Option Supervisor Password Is This parameter indicates whether a supervisor password has been assigned. Clear Enabled User Password Is This parameter indicates whether a user password has been assigned. Clear Enabled Set Supervisor Password Press Enter to configure the supervisor password. Set User Password Press Enter to configure the user password. Password On Boot Select Enabled to activate security check during POST. Disabled Enabled Setting a system password 1 Use the up/down keys to select a password parameter (Set Supervisor Password or Set User Password), then press Enter. A password box will appear. 2 Type a password then press Enter. The password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9). 3 Retype the password to verify the first entry then press Enter again. 4 Press F10. 5 Select Yes to save the new password and close the Setup Utility.