Acer G540-E5405 Altos G540 User's Guide EN - Page 126
LSI 1068 SAS Configuration Utility, To initialize the LSI Logic Config Utility
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
116 Appendix A: Server management tools LSI 1068 SAS Configuration Utility This section explains how to create a RAID 1 volume when the LSI 1068 SAS controller board is installed. To initialize the LSI Logic Config Utility: 1 Turn on the server and the monitor. If the server is already turned on, close all open applications, then restart the server. 2 During POST, press Ctrl-C on the SAS BIOS prompt. To load the factory default RAID setting: 1 On the LSI Logic Config Utility, press Alt-N to display Global Properties. 2 Select Restore Defaults, then press Enter. 3 Press Esc, then select Save changes then exit this menu. 4 Select SAS1068, then press Enter. 5 Select Advanced Adapter Properties, then press Enter. 6 Select Restore Defaults, then press Enter. 7 Press Esc twice, then select Save changes then exit this menu. To create a RAID 1 volume with a hot spare disk: 1 On the LSI Logic Config Utility, click SAS1068, then press Enter. 2 Select RAID Properties, then press Enter. 3 Select Create IM Volume, then press Enter. 4 Move the cursor to the RAID Disk column. 5 Press the space bar to change the setting from No to Yes. The Drive Status will be marked as Primary. 6 Move the cursor to another disk. 7 Press the space bar to change the setting from No to Yes. The Drive Status will be marked as Secondary.