Acer G540-E5405 Altos G540 User's Guide EN - Page 127

LSI MegaRAID SAS RAID Configuration Utility, To initialize

Get Acer G540-E5405 - Altos - 2 GB RAM PDF manuals and user guides
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 127 highlights

117 8 Move the cursor to the Hot Spr column and select another disk. 9 Press the space bar to change the setting from No to Yes. The Drive Status will be marked as Hot Spare. 10 Press C, then select Save changes then exit this menu. 11 Press Esc twice and select Exit the Configuration Utility and Reboot. Proceed to the installation of the operating system. Refer to the user documentation that came with your OS for related instructions. LSI MegaRAID SAS RAID Configuration Utility This section explains how to create a RAID 1 volume when the LSI MegaRAID SAS RAID controller board is installed. To initialize the LSI MegaRAID SAS RAID Configuration Utility: 1 Turn on the server and the monitor. If the server is already turned on, close all open applications, then restart the server. 2 During POST, press Ctrl-H on the RAID BIOS prompt. After POST completion, the Adapter Selection window will appear. 3 Click Start to launch the Configuration menu. To load the factory default RAID setting: 1 On the Configuration menu, select Adapter Properties to display the current adapter settings. 2 Click Next to change the adapter setting. 3 Change the setting of Set Factory Defaults from No to Yes, then click Submit. 4 Press Ctrl+Alt+Del to reboot the server.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
117
8
Move the cursor to the Hot Spr
column and select another disk.
9
Press the space bar to change the setting from No to
Yes
.
The Drive Status will be marked as Hot Spare
.
10
Press
C
, then select
Save changes then exit this menu
.
11
Press
Esc
twice and select
Exit the Configuration Utility and
Reboot
.
Proceed to the installation of the operating system.
Refer to the
user documentation that came with your OS for related
instructions.
LSI MegaRAID SAS RAID Configuration Utility
This section explains how to create a RAID 1 volume when the LSI
MegaRAID SAS RAID controller board is installed.
To initialize the
LSI MegaRAID SAS RAID Configuration Utility
:
1
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press
Ctrl
-
H
on the RAID BIOS prompt.
After POST completion, the Adapter Selection
window will appear.
3
Click
Start
to launch the Configuration
menu.
To load the factory default RAID setting:
1
On the Configuration
menu, select
Adapter Properties
to display
the current adapter settings.
2
Click
Next
to change the adapter setting.
3
Change the setting of Set Factory Defaults
from No to
Yes
, then
click
Submit
.
4
Press
Ctrl
+
Alt
+
Del
to reboot the server.