Acer G540-E5405 Altos G540 User's Guide EN - Page 124
RAID configuration utilities, Onboard SATA RAID Configuration Utility
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
114 Appendix A: Server management tools RAID configuration utilities RAID option for the Altos G540 system is provided through either the onboard SATA controller or through an external controller board option (LSI 1068 SAS controller or LSI MegaRAID SAS RAID controller). Caution: Creating a RAID volume erases all data previously saved in the hard drives. Make sure that you back up important files before starting a RAID configuration process. Onboard SATA RAID Configuration Utility This section explains how to create a RAID 1 volume using the onboard SATA controller. To enable the onboard SATA RAID controller: 1 Turn on the server and the monitor. If the server is already turned on, close all open applications, then restart the server. 2 During POST, press F2 to access the BIOS Setup Utility. 3 Select the Advanced | I/O Device Configuration submenu. 4 Change the setting of the SATA Controller Mode Option field from Compatible to Enhanced. 5 Change the setting of the SATA RAID Enable field from Disabled to Enabled. 6 Press F10. 7 Select Yes to save the new SATA RAID settings and close the Setup Utility.