Acer G540-E5405 Altos G540 User's Guide EN - Page 74

Installing the ARMC/3 module

Page 74 highlights

64 3 System upgrade Installing the ARMC/3 module Remote system management just got easier with the new ARMC/3 module. The module provides high performance KVM (keyboardvideo-mouse) redirection and features a dedicated NIC port for faster network access. To install the ARMC/3 module: 1 Perform the pre-installation instructions described on page 37. 2 Locate the IPMB_6 slot. If necessary, remove any boards or cables that prevent access to it. 3 If necessary, open the holding clips of the IPMB_6 slot. 4 Remove the ARMC/3 module from its protective packaging, handling it by the edges. 5 Install the ARMC/3 module. (1) Align the module so that the notch on the IPMB_6 slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot. When the module is properly installed, the holding clips will automatically lock in place. (2) Secure the module with the one screw.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146

3 System upgrade
64
Installing the ARMC/3 module
Remote system management just got easier with the new ARMC/3
module. The module provides high performance KVM (keyboard-
video-mouse) redirection and features a dedicated NIC port for faster
network access.
To install the ARMC/3 module:
1
Perform the pre-installation instructions described on page 37.
2
Locate the IPMB_6 slot.
If necessary, remove any boards or cables
that prevent access to it.
3
If necessary, open the holding clips of the IPMB_6 slot.
4
Remove the ARMC/3 module from its protective packaging,
handling it by the edges.
5
Install the ARMC/3 module.
(1)
Align the module so that the notch on the IPMB_6 slot fits the
keyed edge of the module, then press the module at both
ends to seat it fully into the slot.
When the module is properly installed, the holding clips will
automatically lock in place.
(2)
Secure the module with the one screw.