Acer G540-E5405 Altos G540 User's Guide EN - Page 72
Installing the SAS controller board
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
62 3 System upgrade Installing the SAS controller board If you intend to install a SAS hard drive, you need to first install the LSI 1068 SAS controller board option. To install the SAS controller board: 1 Perform the pre-installation instructions described on page 37. 2 Locate the SODIMM slot. If necessary, remove any cables that prevent access to it. 3 Remove the SAS controller board from its protective packaging, handling it by the edges. 4 Install the SAS controller board. (1) Align then insert the gold-lined edge of the board into the SODIMM slot. (2) Firmly press the board down to seat it properly. (3) Secure the board with the one screw. 5 Observe the post-installation instructions described on page 38. When you turn on the system, the BIOS setup automatically detects and assigns resources to the new device. For information on how to install a SAS HDD, go to page 45.