Acer G540-E5405 Altos G540 User's Guide EN - Page 67
To remove an FBD, First FBD pair
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
57 • Install FBD pair upgrades in the following sequence: - First FBD pair: DIMMA1 and DIMMB1 slots - Upgrade 1: DIMMC1 and DIMMD1 slots - Upgrade 2: DIMMA2 and DIMMB2 slots - Upgrade 3: DIMMC2 and DIMMD2 slots To remove an FBD: Important: Before removing an FBD, make sure to back up all important system files. Also, note that FBDs should be removed in pairs. 1 Perform the pre-installation instructions described on page 37. 2 Lay the server on its side (components showing). 3 Remove the air duct to access to the FBD slots. (1) Remove the three screws that secure the air duct. (2) Detach the air duct from the heat sink-fan.
57
•
Install FBD pair upgrades in the following sequence:
–
First FBD pair:
DIMMA1 and DIMMB1 slots
–
Upgrade 1:
DIMMC1 and DIMMD1 slots
–
Upgrade 2:
DIMMA2 and DIMMB2 slots
–
Upgrade 3:
DIMMC2 and DIMMD2 slots
To remove an FBD:
Important:
Before removing an FBD, make sure to back up all
important system files.
Also, note that FBDs should be removed
in pairs.
1
Perform the pre-installation instructions described on page 37.
2
Lay the server on its side (components showing).
3
Remove the air duct to access to the FBD slots.
(1)
Remove the three screws that secure the air duct.
(2)
Detach the air duct from the heat sink-fan.