Acer G540-E5405 Altos G540 User's Guide EN - Page 49
Opening the server, Removing the side panel
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
39 Opening the server Caution: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the "Pre-installation instructions" section on page 38. You need to open the server before you can install upgrade components. The front bezel and (left) side panel are removable to allow access to the server's internal components. Refer to the following sections for instructions. Removing the side panel 1 Perform the pre-installation instructions described on page 37. 2 Remove the side panel. (1) Remove the two screws located on the rear edge of the side panel. (2) Press the side panel release button. (3) Slide the side panel toward the rear of the chassis to disengage it.
39
Opening the server
Caution:
Before you proceed, make sure that you have turned
off the system and all peripherals connected to it.
Read the
“Pre-installation instructions” section on page 38.
You need to open the server before you can install upgrade
components.
The front bezel and (left) side panel are removable to
allow access to the server’s internal components.
Refer to the
following sections for instructions.
Removing the side panel
1
Perform the pre-installation instructions described on page 37.
2
Remove the side panel.
(1)
Remove the two screws located on the rear edge of the
side
panel.
(2)
Press the side panel release button.
(3)
Slide the side panel toward the rear of the chassis
to
disengage it.