Acer G540-E5405 Altos G540 User's Guide EN - Page 53
Detach the cover from the bezel., For instructions on how to install a hard drive in a hot-plug HDD
UPC - 750519186893
View all Acer G540-E5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
43 (3) Connect the other end of the SAS/SATA2 cable to the SAS1-1 connector of the SAS controller board. 4 Remove the HDD cage bay plastic cover from the front bezel. (1) Use a flat-blade screwdriver to disengage the tabs on the top edge of the cover from its bezel slots. (2) Detach the cover from the bezel. Store this cover for future reinstallation. 5 Observe the post-installation instructions described on page 38. For instructions on how to install a hard drive in an easy-swap HDD cage, go to page 47. For instructions on how to install a hard drive in a hot-plug HDD cage, go to page 45.
43
(3)
Connect the other end of the SAS/SATA2 cable to the
SAS1-1 connector of the SAS controller board.
4
Remove the HDD cage bay plastic cover from the front bezel.
(1)
Use a flat-blade screwdriver to disengage the tabs on the top
edge of the cover from its bezel slots.
(2)
Detach the cover from the bezel.
Store this cover for future reinstallation.
5
Observe the post-installation instructions described on page 38.
For instructions on how to install a hard drive in an easy-swap HDD
cage, go to page 47.
For instructions on how to install a hard drive in a hot-plug HDD
cage, go to page 45.