Autodesk 057A1-05A111-1001 Getting Started Guide - Page 127
Tutorial: Add Hatches to a Drawing, Under Islands
UPC - 606122219674
View all Autodesk 057A1-05A111-1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Tutorial: Add Hatches to a Drawing In this tutorial, you will hatch part of your drawing to look something like this: 1 Open MyDesign, the drawing that you created and saved in the previous tutorial. 2 Click Menu Browser ➤ Draw ➤ Hatch. 3 On the Hatch tab, under Type and Pattern, notice the name of the hatch pattern and the swatch. Choose a different hatch pattern. 4 Under Boundaries, click Add: Pick Points. Then click anywhere between the parallel lines for the walls and press ENTER. 5 At the bottom of the dialog box, click Preview. There are probably several things that you'll want to change, including the circle being hatched, the hatch angle, and the hatch spacing. 6 Press ESC to return to the dialog box. 7 Click the > (More Options) button at the bottom-right corner of the dialog box. 8 Under Islands, click Outer. Then click the < (Less Options) button. 9 Under Angle and Scale, change the values for the angle and for the scale. If the hatch is too dense, increase the value for the scale by a factor of 10. 10 Click Preview. If the hatch is still not acceptable, return to step 6. Otherwise, right-click or press ENTER to accept the hatch. 11 Save your drawing file. Insert Hatches or Solid Fills | 121