Belkin F1DP216G User Manual - Page 21
OmniView IP Central Access Appliance 5000HQ
View all Belkin F1DP216G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
WEB INTERFACE Table of Contents sections 1 2 3 4 5 6 LAN Under LAN in Figure 14, is the following: Enable DHCP - When a DHCP server is active on the same network to which the Switch is connected, DHCP provides automatic IP assignment. When DHCP is disabled (Recommended) - You can assign a fixed IP address to Switch. Consult your network administrator regarding the use of the DHCP. When DHCP is disabled, enter the IP Address, Subnet Mask, and Default Gateway for LAN, as given by your network administrator. These parameters can be configured locally from the OSD as explained on page 14. OmniView IP Central Access Appliance 5000HQ OmniView IP 5000HQ is a centralized, IP-based system for secure control of servers and network devices, power, and user administration in the datacenter environment. The 5000HQ combines out-of-band, KVM-via-IP access with modern IT standards and requirements. It is the most comprehensive remote server maintenance solution available in the market today. Enable OmniView IP 5000HQ - Check this option to allow the Switch to be remotely managed by Central Manager Appliance 5000HQ. Manager Auto Discovery - When checked, 5000HQ automatically detects the Switch if it resides on the same network segment. Manager IP - If the Switch resides on a different segment, type the static IP address of the 5000HQ management appliance. (We advise typing the static IP address of the 5000HQ management appliance even if the Switch resides on the same network segment as the 5000HQ management appliance.) OmniViewIP 5216K/5232K 18