Brother International GT-361 Instruction Manual - English - Page 144
Confirm if the Wiper Cleaners and Wiper Blades are, Maintenance Unit and Ink Sensor PCB
View all Brother International GT-361 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
7. Troubleshooting Error code Message 5406 5411 5312 Machine Error 5413 5314 5421 5422 Machine Error 5431 5432 5433 Machine Error 5434 5435 5441 5442 5443 Machine Error 5451 5452 Machine Error 5453 5454 5455 5456 Machine Error 5457 5458 Machine Error 5471 5472 5473 5474 5475 5476 5477 Machine Error 5478 134 Meaning Solution Communication error between Main PCB and Maintenance Unit Confirm if there is any device around GT-3 that makes strong noise. Move GT-3 from that device. Contact your dealer or Brother when the issue was not solve after you rebooted GT-3. Failure of moving Pump in the Maintenance Unit Contact your dealer or Brother when the issue was not solve after you rebooted GT-3. Failure of moving Caps in the Maintenance Unit Confirm if the Wiper Cleaners and Wiper Blades are properly mounted in the Maintenance Unit. Confirm that something may prevent the Caps moving up and down. Contact your dealer or Brother when the issue was not solve after you rebooted GT-3. Failure of moving Wipers in the Maintenance Unit Confirm if the Wiper Cleaners and Wiper Blades are properly mounted in the Maintenance Unit. Confirm that something may prevent the Caps and Wipers moving. Contact your dealer or Brother when the issue was not solve after you rebooted GT-3. Internal error of Maintenance Unit caused by firmware update Confirm if there is any device around GT-3 that makes strong noise. Move GT-3 from that device. Reboot GT-3 and re-upgrade the firmware. Communication error between Main Contact your dealer or Brother when the issue was not PCB and the Maintenance Unit caused solve after you rebooted GT-3. by firmware update Internal error of Maintenance Unit caused by firmware update Confirm if there is any device around GT-3 that makes Communication error between strong noise. Move GT-3 from that device. Maintenance Unit and Ink Sensor PCB Contact your dealer or Brother when the issue was not solve after you rebooted GT-3. GT-3 Series