Brother International GT-361 Instruction Manual - English - Page 79

Placing the T-shirt on the Platen, Tighten the Platen Fixing Lever securely.

Get Brother International GT-361 PDF manuals and user guides View all Brother International GT-361 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

4-5. Placing the T-shirt on the Platen 4. Printing Directly from Applications CAUTION Ensure there is adequate space left for safe working. The Platen moves forward while operating. Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt tray and the covers, it may be injured. Do not move the Platen by hand. The Printer may be mechanically and electrically damaged. To get the optimum quality print result, you need to adjust the Platen height depending on the thickness of the T-shirt. z The clearance between the Clearance Sensor and the surface of the Print Heads should be app. 2 mm. If the clearance is wider, the ink mist will spread inside the printer and the printing material, and may damage the sensors inside. If you print with wider clearance (more than 2 mm) then check the inside of the printer and keep it clean. Replace the Maintenance Parts by referring to "6-1. Replacing Consumables" and clean by "6-1-6. Cleaning the inside of the printer and restart" and "6-1-7. Cleaning the Encoder Strip". z If Platen height is too low, the result may be poor quality (e.g. a straight line becomes double). Adjust it properly by test moving the platen in with Platen Button on the Control Panel. When you have to lower the Platen to avoid any material which is thicker i.e. hems the hems, use Uni-Directional print (see "7-2-4. Changing the Print Direction"). You can set a print data as Uni-Directional by the Printer Driver. See "4-3-14. Setting Print Direction as Uni-Directional". z The Platen height can be lower by 13 mm by replacing the Bush Platen Shaft with Platen Height Adjustment Lever assembled and the Platen Positioning Plate to "Platen Lowering Set" (option). See "4-4-3. Lowering the Platen height". (1) If the Platen is not ejected, press the Platen Button to eject it. (2) Loose the Platen Fix Lever and adjust the Platen Height to "A" position (leftmost) for T-shirt. Set it to the "C" position when you print on a sweater or a towel. If the Platen height is too low, the print quality turns worse. Keep the clearance between the Clearance Sensor and the surface of the Print Heads should be app. 2 mm. Platen height adjustment lever Platen fixing lever Do not use force when you adjust the levers. (3) Tighten the Platen Fixing Lever securely. GT-3 Series 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
GT-3 Series
4. Printing Directly from Applications
69
4-5. Placing the T-shirt on the Platen
CAUTION
Ensure there is adequate space left for safe working. The Platen moves forward while operating.
Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt tray and the
covers, it may be injured.
Do not move the Platen by hand.
The Printer may be mechanically and electrically damaged.
To get the optimum quality print result, you need to adjust the Platen height depending on the thickness of the T-shirt.
<Note>
z
The clearance between the Clearance Sensor and the surface of the Print Heads should be app. 2 mm. If the clearance is
wider, the ink mist will spread inside the printer and the printing material, and may damage the sensors inside. If you print
with wider clearance (more than 2 mm) then check the inside of the printer and keep it clean. Replace the Maintenance
Parts by referring to "6-1. Replacing Consumables" and clean by "6-1-6. Cleaning the inside of the printer and restart" and
"6-1-7. Cleaning the Encoder Strip".
z
If Platen height is too low, the result may be poor quality (e.g. a straight line becomes double). Adjust it properly by test
moving the platen in with Platen Button on the Control Panel. When you have to lower the Platen to avoid any material
which is thicker i.e. hems the hems, use Uni-Directional print (see "7-2-4. Changing the Print Direction"). You can set a
print data as Uni-Directional by the Printer Driver. See "4-3-14. Setting Print Direction as Uni-Directional".
z
The Platen height can be lower by 13 mm by replacing the Bush Platen Shaft with Platen Height Adjustment Lever
assembled and the Platen Positioning Plate to "Platen Lowering Set" (option). See "4-4-3. Lowering the Platen height".
(1)
If the Platen is not ejected, press the Platen Button to eject it.
(2)
Loose the Platen Fix Lever and adjust the Platen Height to "A" position (leftmost) for T-shirt. Set it to the "C" position when
you print on a sweater or a towel. If the Platen height is too low, the print quality turns worse. Keep the clearance between
the Clearance Sensor and the surface of the Print Heads should be app. 2 mm.
<Note> Do not use force when you adjust the levers.
(3)
Tighten the Platen Fixing Lever securely.
Platen height adjustment lever
Platen fixing lever