Brother International HL-3400CN Users Manual - English - Page 111
The DOWNLOAD FONT menu appears only in the HP PCL5C, FONT Button
UPC - 012502526223
View all Brother International HL-3400CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
USER'S GUIDE Notes When you save the primary or secondary font, note the following: • The font is temporarily stored in the RAM of the printer before it is saved on the device. If the font data exceeds the RAM capacity, a memory full error occurs. You can clear this error with the Continue button. As not all the font data has been stored in RAM, you cannot save the font to the device. When the font data is saved, the printer is reset to ensure as much capacity as possible in RAM. If any data remains, it is printed. • If you have saved the font at 600-dpi resolution and change the printer resolution to 300 dpi, the printer cannot print the saved font. • Download Font Notes • The "DOWNLOAD FONT" menu appears only in the HP PCL5C emulation mode. • Be sure to print the list of download fonts with the Test button and check the download font ID on the list before you enter this menu. You must select the font in this menu using the same number you see on the list. If you have downloaded a font into the printer memory, you can save it on the flash memory card, HDD card or optional HDD. The printer prompts you to select the download font ID that you can choose from the font list. Press the v or w button to move the cursor to the ID and select it with the Set button. Note The download font IDs do not appear when fonts have not been downloaded. After you have selected the download font ID, press the Set button, so that the printer saves the selected download font. Vector or bitmapped fonts are saved in the format of the original font. Once you save the downloaded font in the device, you will not need to download the font every time you want to use it. Since the font can be saved in either the flash memory card in card slot 1 or 2 (the HDD card can be used only in card slot 2) of the printer, or in the optional HDD, you can select the saved fonts as "DEVICE1(2 or 3) FONT" with the Font button or the font selection command from your software. For font selection, see "FONT Button" in Chapter 4. 4-40