Brother International HL-3400CN Users Manual - English - Page 80

CHAPTER 4 CONTROL PANEL MODE Button Settings in HP PCL5C, EPSON FX-850, and IBM Proprinter XL Modes The following table shows all the selections you can choose with the Mode button in the HP PCL5C, EPSON FX-850 and IBM Proprinter XL modes.  Note The mode menus and settings that appear will vary according to the current emulation mode, printer status and any options that may be installed in the printer. Mode Menu INTERFACE MODE Setting Menu I/F=PARALLEL I/F=RS-232C I/F=EXPAND I/O I/F=AUTO Sub-Setting Menu Setting HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to INTERFACE MODE BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to INTERFACE MODE Available only when a commercial MIO card has been installed. MIO Setting The settings available on the installed MIO card can appear under the sub-setting menu. Exit Exit to INTERFACE MODE TIME OUT= 5s 1 to 99 seconds PRL Setting Bi-directional settings for AUTO HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to PRL Setting RS-232C Setting Parameters for AUTO mode BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to RS-232C Setting 4-9