Brother International HL-3400CN Users Manual - English - Page 140

CHAPTER 4 CONTROL PANEL FEEDER Button You can select the feeder and manual feed mode with the Feeder button. Display Message FEEDER=AUTO MANUAL MODE=ON MEDIA TYPE DUPLEX MODE Feeder Select a feeder or auto paper feed. Enable/disable the manual feed mode. Select print media Select duplex printing mode (only with the DX-3400 duplex unit installed) You can check the current feeder and the duplex mode on the display. When tray1 has been selected, the display shows the following message. 00 READY 001P T1 When the multi-purpose tray and the duplex printing mode have been selected, the display shows the following message. 00 READY 001PsT1 The black square s indicates that the duplex printing mode is selected. When you want to change settings with the Feeder button, hold down the Shift button and press the Feeder button. You will then enter the setting mode where you change the feeder, manual feed mode, etc. FEEDER To select the feeder, follow these steps: 1. Press the Sel button to take the printer off-line. 2. Hold down the Shift button and press the Feeder button. When you enter the setting mode, the display first shows the current feeder setting with the asterisk. 3. Display Message FEEDER=AUTO FEEDER=TRAY1 FEEDER=TRAY2 FEEDER=TRAY3 Press the v or w button until the feeder you want appears on the display. Paper Feed Method/Paper Source Auto paper feed Upper Media Cassette (Tray 1) Optional Lower Media Cassette (Tray 2) Optional Lower Media Cassette (Tray 3) 4-69