Brother International HL-3400CN Users Manual - English - Page 146

CHAPTER 4 CONTROL PANEL 4. Press the Set button to make the displayed selection effective. The printer is reset according to the selected reset mode. Selected Mode RESET PRINTER RESET SETTING 1-2 FACTORY SETTINGS LCD message 08 RESET TO ↔USER SETTINGS 08 RESET TO ↔SETTING # 1* 09 RESET TO ↔FACTORY SETTINGS 1* - # indicates the selected number of saved settings The printer automatically exits from the reset mode to the online state. 5. When you enter the RESET PARTS LIFE mode: LCD Message FC ROLLER OPC BELT FUSER UNIT 240K KIT Parts replaced Fuser Cleaner (OPC) Belt Cartridge Fixing Unit Drum Cleaner, Paper Discharge, Transfer Roller The reset item is selected according to the Maintenance message that shows the currently recommended part to replace. Press Set to reset the parts life. See Chapter 5 for more detailed information. List of Factory Settings The following table shows the factory settings made before shipment.  Notes • The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table. • The following settings cannot be restored to the factory settings with the Reset button in the "FACTORY SETTINGS" mode: INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local LANGUAGE for display messages. • The COPY setting is always restored to the factory setting when the printer is turned off and on again. • The user settings are overwritten after resetting to User Settings 1 or 2. 4-75