Brother International HL-3400CN Users Manual - English - Page 84
MODE Button Settings in BR-Script 2 Mode, installed in the printer.
UPC - 012502526223
View all Brother International HL-3400CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
CHAPTER 4 CONTROL PANEL MODE Button Settings in BR-Script 2 Mode The following table shows all the selections you can choose with the Mode button in the BR-Script 2 mode. Note The mode menus and settings that appear will vary according to the current emulation mode, printer status and any options that may be installed in the printer. Mode Menu INTERFACE MODE Same as HP PCL5C Mode Setting Menu Sub-Setting Menu Setting FORMAT MODE PAGE FORMAT MODE PAPER=LETTER LETTER, LEGAL, A4, A5, B5, (For 120V model) PAPER=A4 JIS B5, EXECUTIVE, COM10, C5 and DL (For 220/240V model) X OFFSET=0 -500 (left) to +500 (right) dots Y OFFSET=0 -500 (down) to +500 (up) dots exit Exit to PAGE FORMAT MODE COLOR MODE Same as PCL5C mode exit Exit to PAGE FORMAT MODE RESOLUTION MODE RESOLUTION RESOLUTION=600 300 or 600 dpi CAPT SETTING CAPT=ON ON or OFF HRC SETTING HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK exit Exit to RESOLUTION MODE DEVICE OPERATION When the commercial flash memory card or the HDD card has not been formatted: FORMAT DEVICE DEVICE1 DEVICE2 Format the flash memory card, HDD card or optional HDD. DEVICE3 exit Exit Exit to DEVICE OPERATION DEVICE OPERATION When the commercial flash memory card, HDD card or optional HDD has been formatted: DEVICE1 EXECUTE DATA Execute the data on the card. DEVICE2 DATA ID=##### Execute the selected data. DEVICE3 DEVICE LIST Print the contents of the device. SAVE SAVE DATA Send data to be saved. SET KEY--> END End saving the data. DATA ID=##### Set data ID for saved data. Exit Exit to DEVICE OPERATION DELETE MACRO ID=##### Delete the selected macro. DATA ID=#### Delete the selected data. FONT ID=##### Delete the selected font. FORMAT DEVICE Format the device. SET -> DELETE ALL Execute formatting the device. Exit Exit to FORMAT DEVICE exit Exit to DEVICEOPERATION 4-13