Brother International HL-3400CN Users Manual - English - Page 78

CHAPTER 4 CONTROL PANEL  Notes When you press the Sel button, remember the following: • All other buttons-except the Sel button-are operational only when the printer is off-line. • If the printer is not in AUTO emulation mode, the LCD displays the current emulation by pressing the Sel button to take it off-line, but you cannot enter other emulation modes. To make settings in other emulation modes, press the Emulation button and select the emulation. • The Sel button works as a "quick exit" button. If you are lost in the display menus or you want to quickly exit the display menu, press the Sel button. You can exit quickly from any level of the display menu to the on-line mode. If you have already made a setting effective by pressing the Set button and then press the Sel button to quickly exit, your setting (whether made by accident or on purpose) will remain effective. Pressing the Sel button will not cancel any setting. SET Button Pressing the Set button allows you to select certain items on the display or make the displayed menu or setting effective. The button also works as an execute button to perform the displayed function. When you press the Set button, the printer stores the settings you have selected into the memory as "User Settings." Every time you turn on the printer, it is reset to these user settings. They remain effective until you make new settings or restore them to the factory settings. For factory reset, see "RESET Button" in this chapter.  Note When you press the Set button to select a setting, for a short time an asterisk appears at the end of the display. Since the asterisk then indicates the current selection, you can easily find the current setting again when you scroll through the display. v (UP) or w (DOWN) Button Press the v (UP) or w (DOWN) button to scroll forward or backward through the menus and settings. Press or continue pressing the button until you locate your desired option. 4-7