Brother International HL-3400CN Users Manual - English - Page 136

CHAPTER 4 CONTROL PANEL EMULATION Button This factory setting for the automatic emulation selection function is ON. The printer will select the emulation mode automatically when it receives data from the computer. To set the emulation mode manually, hold down the Shift button and press the Emulation button. Then enter the setting mode to change the emulation. To set the emulation mode, follow these steps: 1. Press the Sel button to take the printer off-line. 2. Hold down the Shift button and press the Emulation button. When you enter the setting mode, the display first shows the current emulation mode with an asterisk. 3. Press the v or w button until the emulation mode you want appears on the display. Display Message Emulation Mode AUTO Auto Emulation Selection HP PCL5C HP PCL5C BR-Script 2 BR-Script level 2 mode HP-GL HP-GL Plotter Mode EPSON FX-850 EPSON FX-850 IBM ProprinterXL IBM Proprinter XL 4. Press the Set button to make the displayed selection effective. When you select any specific emulation mode other than "AUTO," for a short time an asterisk appears at the end of the display. Then the printer automatically exits from the setting mode to the off-line mode. When you select "AUTO," the sub-item "Time Out" for the automatic emulation selection appears on the display. Go to the next step. 5. Set "Time Out" with the v or w button. This time out is the duration during which the printer will not allow another automatic emulation change. You can set it from 1 second to 99 seconds: the factory setting is 5 seconds. 6. Press the Set button. The next sub-item "EPSON/IBM" appears on the display. 4-65