Brother International HL-3400CN Users Manual - English - Page 81

USER'S GUIDE Mode Menu (Continued) INTERFACE MODE (Continued) Setting Menu I/F AUTO (Continued) FORMAT MODE ORIENTATION AUTO MODE PAGE FORMAT MODE Sub-Setting Menu MIO Setting ORI=PORTRAIT AUTO LF=OFF AUTO CR=OFF AUTO WRAP=OFF AUTO SKIP=ON (HP mode) AUTO MASK=OFF (EPSON & IBM modes) exit PAPER =LETTER (For 120V model) PAPER =A4 (For 220/240V model) Setting Available only when a commercial MIO card has been installed. The settings available on the installed MIO card can appear under the subsetting menu. PORTRAIT or LANDSCAPE ON ... LF + CR OFF ... CR only ON ... LF, FF, or VT + CR OFF ... LF, FF, or VT only ON ... Auto wrap on OFF ... Auto wrap off ON ... Auto FF at bottom margin OFF ... No FF at bottom margin ON ... Auto mask on OFF ... Auto mask off Exit to AUTO MODE 330x482mm(13"X19"), LEDGER, LETTER, LEGAL, A3, A4, A5, B4, B5, EXECUTIVE, JIS B5, COM10, C5 and DL RESOLUTION MODE PAGE PROTECTION COLOR MODE exit RESOLUTION HRC SETTING exit PROTECT=AUTO LEFT M = 0C 0 to 126 columns RIGHT M = 80C 10 to 136 columns (Letter, Portrait) RIGHT M = 78C 10 to 136 columns (A4, Portrait) TOP M =0.5" (HP mode) 0, 0.33, 0.5, 1.0, 1.5, or 2.0" (0,8.4, 12.7, 25.4, 38.1 or 50.8 mm) BOTTOM M=0.5" 0, 0.33, 0.5, 1.0, 1.5, or 2.0" (HP mode) (0,8.4, 12.7, 25.4, 38.1 or 50.8 mm) LINES = 60L 5 to 128 lines/page (HP, Letter, Portrait) LINES = 64L 5 to 128 lines/page (HP, A4, Portrait) X OFFSET= 0 -500 (left) to +500 (right) dots Y OFFSET= 0 -500 (down) to +500 (up) dots exit Exit to PAGE FORMAT MODE COLOR PRINT = ON...Enable color printing ON OFF...Monochrome print mode Exit to FORMAT MODE RESOLUTION 300 or 600 dpi HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK Exit to RESOLUTION MODE AUTO, OFF, LETTER, A4, or LEGAL DEVICE OPERATION When the commercial flash memory card, HDD card or optional HDD has not been formatted: (HP mode only) FORMAT DEVICE DEVICE1 DEVICE2 Format the flash memory card, the HDD card or optional HDD. DEVICE3 exit exit Exit to DEVICE OPERATION 4-10