Brother International HL-3400CN Users Manual - English - Page 55

CHAPTER 3 BEFORE WORKING WITH THE PRINTER CHAPTER 3 BEFORE WORKING WITH THE PRINTER AUTOMATIC EMULATION SELECTION This printer has an automatic emulation selection function. When the printer receives data from the computer, it automatically selects the emulation mode. This function has been factory set to ON. The printer can select the emulation among the following combinations: EPSON/IBM Priority Auto Selection Mode EPSON (default) HP PCL 5C BR-Script 2 HP-GL EPSON FX-850 IBM HP PCL 5C BR-Script 2 HP-GL IBM Proprinter XL To get the best possible color output, we recommend you use the Brother BR-Script 2 emulation. The printer is set to the HP color printer emulation (PCL5C) mode automatically. Since PCL5C mode takes the highest priority in the automatic emulation selection, you can start using the printer as it is with the factory settings in most cases. When the automatic emulation selection is active, you can check the current emulation on the display. When the printer is in ready, print or wait modes, the display reads as follows: Emulation HP PCL5C BR-Script 2 HP-GL EPSON FX-850 IBM Proprinter XL Status Display in Ready State LJ READY 001P T1 BS IDLE 001P T1 GL READY 001P T1 FX READY 001P T1 PR READY 001P T1  Notes Emulation modes other than PCL5C and BR-Script 2 are monochrome emulation modes. To select the emulation mode manually, use the Emulation button. For further information, see "EMULATION Button" in Chapter 4. 3-1