Canon BJC-55 User manual for the BJC-55 - Page 323

Problems and Solutions CHARGE/ ERROR Light Flashing 1 2 Beeps Meaning Paper not set in feed slot correctly Ink is low Solution Remove the paper from the feed slot and load it correctly. When the low-ink warning is on, this alert appears. Press RESUME to continue. Replace the BJ tank as soon as possible. Also, at the same time reset the low-ink warning counter. When BJ cartridge is replaced, press the RESUME button to resume printing. Change the battery pack. You may be able to print by pressing the RESUME button but the waste BJ tank needs to be replaced soon. Call the Canon Customer Care Center. 3 4 5 BJ cartridge is being replaced Battery is low Waste ink absorber is full Before You Call For Service 6 Battery is damaged Turn off the printer then turn it on again. After turning the printer off and on, if the problem persists, remove the battery and replace it with a new one. 1-7 Both 9-11 CHARGE/ ERROR and POWER lights flash8 ing An error occurred inside the A serious error may have occurred. Turn off the printer. Wait printer several minutes, then turn it back on. If the error still persists, call the Canon Customer Care Center. Before You Call For Service Printer is overheated A serious error may have occurred. Turn off the printer for approximately 15 minutes and then turn it back on. If the error persists, replace the BJ cartridge. If this does not correct the problem, call the Canon Customer Care Center. Before You Call For Service Troubleshooting 323