Canon EOS M200 Advanced User Guide - Page 414
Wireless LAN connection lost, Incorrect wireless LAN password, Incorrect wireless LAN encryption
View all Canon EOS M200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
Responding to Error Messages 65: Wireless LAN connection lost zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? BBMove the antenna of the access point to a position clearly visible from the point of view of the camera (=418). zz The Wi-Fi connection was lost for some reason, and the connection cannot be restored. BBThe following are possible reasons: excessive access to the access point from another device, a microwave oven or similar appliance in use nearby (interfering with IEEE 802.11b/g/n (2.4 GHz band)), or influence of rain or high humidity (=418). 66: Incorrect wireless LAN password zz Are the camera and the access point set to use the same password for authentication? BBThe setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera. 67: Incorrect wireless LAN encryption method zz Are the camera and the access point set to use the same encryption method? BBThe camera supports the following encryption methods: WEP, TKIP, and AES. zz If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? BBRegister the MAC address of the camera used to the access point. The MAC address can be checked on the [View info] screen (=405). 414