Canon EOS M200 Advanced User Guide - Page 483

Troubleshooting Guide The maximum burst during continuous shooting is lower. zz If you shoot a subject that has fine detail such as a field of grass, the file size will be larger, and the actual maximum burst may be lower than the number listed on =497. Even after I change the card, the maximum burst displayed for continuous shooting does not change. zz The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card. The maximum burst shown in the table on =497 is based on Canon's testing card. (The faster the card's writing speed, the higher the actual maximum burst will be.) For this reason, the maximum burst displayed may differ from the actual maximum burst. Even if I set a decreased exposure compensation, the image comes out bright. zz Set [z: Auto Lighting Optimizer] to [Disable] (=143). When [Low], [Standard], or [High] is set, even if you set a decreased exposure compensation or flash exposure compensation, the image may come out bright. ISO 100 cannot be set. ISO speed expansion cannot be selected. zz When [z: Highlight tone priority] is set to [Enable] or [Enhanced], the available ISO speed range starts at ISO 200. zz When [z: Highlight tone priority] is set to [Enable] or [Enhanced], H (expanded ISO speed) is not available, even with [ISO expansion] in [5: Custom Functions(C.Fn)] set to [1: On]. zz When [z: Highlight tone priority] is set to [Disable], you can set ISO 100/125/160 or H (expanded ISO speed). 483