Canon EOS M200 Advanced User Guide - Page 487

Troubleshooting Guide The exposure changes during movie recording. zz If you change the shutter speed or aperture during movie recording, the changes in the exposure may be recorded. zz Recording a few test movies is recommended if you intend to perform zooming during movie recording. Zooming as you record movies may cause exposure changes or lens sounds to be recorded, an uneven audio level, or loss of focus. The image flickers or horizontal stripes appear during movie recording. zz Flickering, horizontal stripes (noise), or irregular exposures can be caused by fluorescent lighting, LED lighting, or other light sources during movie recording. Also, changes in the exposure (brightness) or color tone may be recorded. In [M] mode, a slow shutter speed may reduce the problem. The problem may be more noticeable in time-lapse movie recording. The subject looks distorted during movie recording. zz If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie recording. I cannot take still photos during movie recording. zz Still photos cannot be taken with the shooting mode switch set to . Before taking still photos, set the switch to , then select a shooting mode for still photos. 487