Canon MAXIFY MB5420 MB5400 series PDF User Manual Windows - Page 547

Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction. You can change the rotation direction by going to the Maintenance tab, opening the Custom Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape] check box. To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left when orientation is [Landscape] check box. Print Quality Selects your desired printing quality. Select one of the following to set the print quality level that is appropriate for the purpose. High Gives priority to print quality over printing speed. Standard Prints with average speed and quality. Paper Source Select the source from which paper is supplied. Cassette (Auto Select) Based on the paper settings on the printer driver and the cassette paper information registered on the printer, the printer automatically determines which cassette to use and feeds paper from that cassette. Cassette 1 Paper is fed from the cassette 1. Cassette 2 Paper is fed from the cassette 2. Important • Depending on the media type and size, the Paper Source settings that can be selected may differ. Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. Always Print with Current Settings Prints documents with the current settings starting from the next print execution. When you select this function and then close the printer driver setup window, the information that you set on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings is possible starting from the next print execution. Important • If you log on with a different user name, the settings that were set when this function was enabled are not reflected in the print settings. • If a setting was specified on the application software, it has priority. 547