Canon MAXIFY MB5420 MB5400 series PDF User Manual Windows - Page 865

Scanning with WIA Driver You can scan an item from a WIA (Windows Image Acquisition)-compliant application. The procedure varies depending on the application. The following procedures are examples only. Refer to the application's manual for details. Important • Some applications do not support continuous scanning from the ADF (Auto Document Feeder). Refer to the application's manual for details. • Follow these steps to enable scanning over a network. • Windows 10/Windows 8.1/Windows 8: 1. Right-click Start menu, and then select File Explorer > Network. 2. In Network menu of displayed screen, select Add devices and printers. 3. In screen for adding device, select XXX_MAC address (where "XXX" is model name), and then click Next. • Windows 7/Windows Vista: 1. Follow the procedure below to open Network. • Windows 7: From Start menu, select Computer > Network. • Windows Vista: From Start menu, select Network. 2. Right-click XXX_MAC address (where "XXX" is model name) in the displayed screen, then select Install. The setting may have been completed already depending on your environment. In that case, Uninstall appears. Scanning with WIA Driver 2.0 The following is an example of scanning using "Windows Fax and Scan." 1. Place the item on the platen or ADF. Positioning Originals (Scanning from Computer) 2. Select New on the File menu of "Windows Fax and Scan," then click Scan.... The scan setting screen appears. Note • If you have more than one scanner or printer, a scanner selection screen may appear. Doubleclick the scanner you want to use. • For USB connection: Canon XXX series (where "XXX" is the model name) • For network connection: XXX series_MAC address (where "XXX" is the model name) 3. Specify the settings. 865