Canon MAXIFY MB5420 MB5400 series PDF User Manual Windows - Page 922

Setting Items for Scanning Using Operation Panel You can change the scan settings such as the scan size, resolution, or data format. When the Scan standby screen is displayed, tap Settings to select the setting item. Flick vertically or tap to display setting items and tap the setting item to display the settings. Tap to specify the setting. Note • When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista), you cannot specify the scan setting. • Depending on the destination, some setting items cannot be selected. This section describes the setting items when you select USB flash drive on the screen for selecting to which you save the data. The setting item which cannot be selected is displayed grayed out. • Some settings cannot be specified in combination with the setting of other setting item, the document type selected for Doc.type, or the scan menu on the screen for selecting to which you save the data. If the setting which cannot be specified in combination is selected, and Error details are displayed on the touch screen. In this case, tap on the upper left on the touch screen to check the message and change the setting. • The specified scan settings other than ADF orientation and ADF duplex scan such as the scan size, resolution, and data format are retained even if the printer is turned off. • When scanning starts in the scan menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the touch screen. Change the setting, following the on-screen instructions. • For setting items or procedure for scanning from the computer: • For Windows: Settings Dialog Box Using IJ Scan Utility • For Mac OS: Settings Dialog Using IJ Scan Utility 1. Scan size Select the size of the original. 2. Format 922