Canon SELPHY ES3 SELPHY ES3 Printer User Guide - Page 76

Infrared (IrDA) Wireless Printing Print images transmitted from a mobile phone supporting infrared data communication (IrDA). SELPHY printer supports IrSimple (higher speed infrared data communication). z The mobile phone must have the following features. • Infrared data communication (infrared data communication port supporting IrDA) • A built-in camera capable of recording and saving JPEG images. 1 Check that no memory cards are inserted in the printer, no Bluetooth unit is attached, and the camera is not connected via USB cable. 2 Press until the power lamp lights green to turn the power on. 3 Transmit an image from your mobile phone to the printer. Within 20 cm (7.9 in.) (Do not place objects within this range.) • Printing starts after data transmission is completed and the power lamp blinks green. Effective range Approx. 10 degrees (right to left) Approx. 20 degrees (top to bottom) 3 • Printing is done according to the setting value specified in [Print Settings]. Setting of each item must be done in advance (p. 54). • If an error occurs, a message will display on the printer's or mobile phone's screen. • Printing cannot be canceled by pressing during infrared printing. • If the transfer is not working well, reposition the mobile phone closer and directly in front of the infrared data receiver and reinitiate the transfer. • Note that the distance over which infrared signals can be transmitted and received varies according to the mobile phone model. For details on connection, refer to your mobile phone's user guide. 76 Printing from a Mobile Phone (Wireless Printing)