Cisco 6513 Installation Guide - Page 110
Table 2-22, WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features continued
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
10/100 and 10/100/1000 Ethernet Modules Chapter 2 Ethernet Switching Modules Table 2-22 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features (continued) Feature Pluggable transceivers support TDR support Module front panel LEDs Description Not supported. Not supported. STATUS • Green-All diagnostics pass; the module is operational. • Orange-The module is booting or running diagnostics. An overtemperature condition has occurred. (A minor temperature threshold has been exceeded during environmental monitoring.) • Red-The module is resetting. The switch has just been powered on or the module has been hot inserted during the normal initialization sequence. An overtemperature condition has occurred. (A major temperature threshold has been exceeded during environmental monitoring.) If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. LINK • Green-The port is active (the link is connected and operational). • Orange-The module or port is disabled through the CLI command or the module is initializing. • Flashing orange-The port is faulty and has been disabled. • Off-The port is not active or the link is not connected. PHONE • Green-The PoE daughter card is installed and detected. • Off-The PoE daughter card is not detected or is not installed. 2-36 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-03