Cisco 6513 Installation Guide - Page 85
Catalyst 6500 Series DFC, DFC3A, and DFC3BXL, Installation Note, WS-F6K-DFC3B
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 2 Ethernet Switching Modules 10 and 10/100 Fiber-Based Ethernet Modules Table 2-7 WS-X6524-100FX-MM Features (continued) Feature Queues per port Chassis/slot restrictions Bus connection Module upgrades available PoE support Distributed forwarding support Pluggable transceivers support Digital Optical Monitoring (DOM) support Module front panel LEDs Description • Tx-1p3q1t • Rx-1p1q0t No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis. Single connection into the 32-Gbps shared bus Not available Field upgradeable to support distributed forwarding with the following daughter cards: • WS-F6K-DFC • WS-F6K-DFC3A • WS-F6K-DFC3B • WS-F6K-DFC3BXL See Appendix A for further information on the DFC daughter cards. See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note for field installation procedures. Not supported Not supported STATUS • Green-All diagnostics pass; the module is operational. • Orange-The module is booting or running diagnostics; an overtemperature condition has occurred. LINK • Green-The port is active (the link is connected and operational). • Flashing orange-The port failed diagnostics and is disabled. • Orange-The port is disabled. • Red-The module is resetting; an overtemperature condition has occurred. Note If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. • Off-The port is not active or the link is not connected. OL-6265-03 Catalyst 6500 Series Ethernet Modules Installation Guide 2-11