Cisco 6513 Installation Guide - Page 55
Table 1-16, Catalyst 6509-NEB Switch Specifications, Environmental, Physical Characteristics, Airflow
View all Cisco 6513 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 1 Catalyst 6500 Series Switch Chassis Overview Catalyst 6509-NEB Switch Table 1-16 Catalyst 6509-NEB Switch Specifications Item Specification Environmental Temperature, operating Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) Note The Catalyst 6500 series switches are equipped with internal air temperature sensors that are triggered at 104°F (40°C) generating a minor alarm and at 131°F (55°C) generating a major alarm. Temperature, nonoperating -4° to 149°F (-20° to 65°C) and storage Thermal transition 0.5°C per minute (hot to cold) 0.33°C per minute (cold to hot) Humidity (RH), ambient 10% to 90% (noncondensing) operating Humidity (RH), ambient (noncondensing) nonoperating and storage 5% to 95% Altitude, operating Certified for operation: 0 to 6500 feet (0 to 2000 m) Designed and tested for operation: -200 to 10,000 feet (-60 to 3000 m) Physical Characteristics Dimensions (H x W x D) • 33.3 x 17.2 x 18.1 in. (84.6 x 43.7 x 46.0 cm). • Chassis requires 20 RU. • Chassis can be mounted in equipment racks that meet ANSI/EIA 310-D and ETS 300-119 standards. Weight Airflow Chassis only: 55 lb (24.9 kg). Chassis fully configured with 1 supervisor engine, 8 switching modules, and 2 power supplies: 135 lb (61.2 kg). • WS-C6509-NEB-FAN (standard fan tray)-294 CFM • Optional high-speed fan tray1-630 CFM Note To maintain proper air circulation through the Catalyst switch chassis, we recommend that you maintain a minimum 6-inch (15 cm) separation between a wall and the chassis air intake or a wall and the chassis air exhaust. You should also allow a minimum separation of 12 inches (30.5 cm) between the hot air exhaust on one chassis and the air intake on another chassis. Failure to maintain adequate air space can cause the chassis to overheat and the system to fail. On Catalyst chassis in which the airflow is from front to back, the chassis may be placed side-by-side. 1. Part of the WS-6509-NEB-UPGRD kit. OL-6265-03 Catalyst 6500 Series Ethernet Modules Installation Guide 1-39